N Type S/Steel Bulkhead Rear Mount Solder / Solder Jack ( 2 Flats )

25-217-H3-HB

N Type 50 ohm rear mount bulkhead jack for direct solder to semi-rigid cable. The contact is gold plated as is the rear body for soldering to the copper jacket of the cable. The outer contact body, Hex nut and Locking Washer are made from passivated stainless steel the Solder Body is gold plated stainless steel . Fits a mounting hole with 2 flats. Suitable RG402 (0.141") semi rigid and similar cables in group HB.

N Type 50 ohm are a rugged screw coupled, mid sized series of connectors, with versions available for use up to 11 GHz. N Type connector interface is according to Mil 30912 and are sealed to IP67 when mated. 75 ohm versions of N Type are also available.

Make an enquiry

Specification

Electrical Specification
Impedance	50 Ohm
Frequency Range	18GHz
Dielectric Withstand Voltage	1500 Veff
Insulation Resistance	5000 M-Ohm
Mechanical Specification
Design Standard	IEC 61169-8
RoHS Compliant	Yes
Centre Contact Termination	Solder
Outer Contact Termination	Solder
Mating Cycles	500
Contact Retention	27N min
Cable Retention	200N min
Weight	32.34g
Mating Force	6.6Ncm max
Un-Coupling Force	6.6Ncm max
Environmental Specification
Operating Temperature	-55 to +155 Deg C
IP Rating ( Mated )	IP67
Materials
Centre Contact	Beryllium Copper
Outer Contact	Stainless Steel
Insulator	PTFE
Centre Contact Plating	Gold
Outer Contact Plating	Passivated
Pack Size	1

Suitable for Cables in Group HB - full cable information available here.

Cable Type	Cable Group	Impedance Ohms	Jacket O/D mm	Dielectric Material	Dielectric O/D mm	Centre Conductor Material	Centre Conductor O/D mm	Centre Conductor Stranding mm	Shielding Outer Conductor
RG402 (.141")	HB	50	3.58	PTFE	3.02	SCCS	0.91	1/0.91	Solid Copper Tube

Build your own assembly with our Cable Configurator

Open Configurator

Performance

Performance Data available on request, please contact COAX

Assembly

Assembly Process	AP033
Stripping Dimensions	25-279-SD
Centre Contact	Solder
Outer Contact	Solder
General Notes	CD 0015

Accessories

Downloads

Interface Dimensions	C-50-Ohm-N
Stripping Dimensions	25-279-SD
Data Sheet	25 217 H3 HB A00 0
Assembly Process	AP033
General Notes	CD 0015